Customized and tailored software for your system solution

The Lodam Cooling Module Controller can be customized to optimize the operation of your cooling module. The controller has multiple alarm functions, multiple language selection and versatile connectivity as the input signal can be either analogue input 0-10V/4-20mA or via ModBus (RS485). The controller can be built up through the modules below, which all are designed specially to optimize the cooling module according to your needs:

Modules	Description
Defrosting of the evaporator	Defrosting for better performance: can be by air, hot gas or electrical heating.
Hot gas regulation	Below minimum compressor speed hot gas is used to reduce capacity.
Heating/Cooling Reversible	Equipped with a 4-way valve, the cooling module can be “reversed” and used as heat pump.
Frequency control	Frequency controlled compressor for optimal step less operations through small frequency changes.
Compressor capacity control	Inverter controlled compressor saves energy and optimizes operation.
Safe area operation	To protect components capacity is reduced when frequency inverter or suction pressure are out of safe area.
Summer / winter operation	Two different temperature set points to secure optimal operation during winter.
Data logger	Easier maintenance and service with battery backup for logging of data and alarms.
Refrigerant configurable	Conversion of saturated condenser pressure to condensing temperature depending on the used refrigerant.